Fenner Curved Tooth Flexible Gear Couplings are made for extensive use in Metal Rolling Mills, Paper Machinery, Cranes, Dredgers, Rubber and Plastic Industries, Cement Plants, Conveyors and Elevators, Compressors, Fans and Blowers, Screens and other general industries. 

Fenner Gear Couplings are distinguished by their mechanical flexibility and compensation of Angular, Parallel and Axial misalignments of the connected shafts. 

Flexible Gear Couplings basically consist of two hubs, with crowned external teeth and two outer sleeves with internal spur teeth. 

Gear Hubs and the outer sleeves are manufactured from carbon steel and are hardened to the required degree. They are machined to fine tolerances for proper meshing of the gears as well as for inter-changeability. The Coupling sleeves are joined together with high tensile steel bolts (Class 8.8 IS: 1367) fitted using a gasket in between them. 

LUBRICATION: The coupling must be filled with grease or oil. Recommendation for grease (Indian Oil - Servogem EP 1 or equivalent) where maximum temperature is within 80°C. For above 80°C, Oil (Recommended: Indian Oil - Servomesh SP 680 or equivalent). 

Fenner Full and Half Gear Coupling